While working with one of our customers who had a Maipu Router, we realized that we don’t have the router’s NetFlow configuration in our website and I am sharing it with you in this blog.
configuration:
router[config]# ipfix source serial0/0
router[config]# ipfix destination 192.168.1.1 9996
router[config]# ipfix template refresh timers 1
router[config]# ipfix template refresh packets 500
router[config]# ipfix template flow fields
router[config]# ipfix template option refresh timers 1
router[config]# ipfix template option refresh packets 500
router[config]# ipfix option export
router[config]# ipfix option export export 1
router[config]# ip flow enable
router[config]# int gigaethernet2
router[config-if-gigaethernet2]# ipfix ingress
router[config-if-gigaethernet2]# exit
From the above the Ingress should be enabled on all active layer 3 interfaces.
Once you have configured the devices to export IPFIX, there is no configuration that has to be done on the product itself as it will automatically capture the packets reaching the server on UDP port 9996 and start displaying the data.
You can download the 30 day trial from here.
Arun Karthik
NetFlow Analyzer Technical Team
Download | Interactive Demo | Twitter | Customers
Thanks for presenting the configuration so explicitly.