The number of customers using sFlow technology is increasing by the day. NetFlow Analyzer supports sFlow technology apart from NetFlow, J-Flow, IPFIX etc.

This blog post is for the benefit of those customers leveraging sFlow technology in their network with special focus on networks using Alcatel Omni Switches. You can find the configuration for these switches to export sFlow, in this blog post.

The switches that support sFlow export are OmniSwitch 6400, 6850, 6855, 9000 and 9000E.


Given below are the commands to be enable the switch to export sFlow packets.


sflow agent ip <ip_address>

sflow receiver 1 name sFlowTrend address NetFlow Anlayzer server IP address udp-port 9996 packet-size 1400 version 5 timeout

sflow sampler 1 1/1-24 receiver 1 rate 1024

sflow poller 1 1/1-24 receiver 1 interval 5

Please add the sampler and poller on every active interface/port of the device.

No additional configuration is required apart from configuring these devices to export sflow(the one mentioned above) on the product as it will automatically capture the packets reaching the server on UDP port 9996 and start displaying the data.

You can download the 30 day trial from here.

Hope this blog post is informative and helpful.

Arun Karthik 

NetFlow Analyzer Technical Team


Download | Interactive Demo  | Twitter | Customers