This blog may need prior reading of my first blog about Flexible NetFlow. We have already discussed about the advantages of Flexible NetFlow and migration from traditional NetFlow versions to FNF. To make this transition smooth Cisco provides the option of pre-defined flow records which can be used to configure Flexible NetFlow without investing a lot of time. And as I mentioned earlier it also helps your existing NetFlow V9 collector to parse exported data. However to use Flexible NetFlow to its fullest potential or to monitor a specific network behavior, you should create your own customized records. 

        Let’s see how to configure Flexible NetFlow to export flow statistics. Flexible NetFlow export can be configured in three easy steps.

1. Configure the exporter

2. Configure the Flow Monitor with the pre-defined Flow Record and Flow Exporter attached to the monitor.

3. Add the Flow Monitor to the interface to monitor either ingress (input) or egress (output traffic).

1. Configuring Exporter

                    Flow exporter can be configured with a unique name. Multiple Flow exporter profiles can be configured. Below is the configuration to configure Flow Exporter.

flow exporter <exporter name>

destination <ip address of ME NFA>

transport udp <port number>

Example configuration:

flow exporter me_nfa_analyzer

destination 192.168.1.1

transport udp 9996   

2. Flow Monitor and Flow record configuration

Flow record configuration defines the fields exported via NetFlow protocol. Flexible pre-defined flow records are based on the original NetFlow ingress or egress caches. Cisco provides a unique keyword to identify the pre-defined records and these records can associated with a Flexible NetFlow Flow record configuration. The Flexible NetFlow "netflow-original" and netflow ipv4 original-input are predefined records and these two records can be used interchangeably to export the basic key fields and time stamp fields. Flow monitors can also include packet sampling information if sampling is required.

flow monitor <monitor name>

record netflow-original

exporter <exporter name>

cache timeout active <seconds>

cache timeout inactive <seconds>

Example Configuration:

flow monitor me_nfa_monitor

record netflow-original

exporter me_nfa_analyzer

cache timeout active 60

3. Adding Flow Monitor to the interface

Flow Monitor has to be attached to a specific physical or logical interface to export flow statistics for that particular interface. Below is the configuration to attach flow monitor to a specific interface.

interface <interface name>

ip flow monitor <monitor_name> input

Example Configuration:

interface serial0/0

ip flow monitor me_nfa_monitor input

   And the above configuration can be verified by "show flow monitor" command. As I mentioned earlier Flexible NetFlow has numerous advantages and has the power of supporting new performance monitoring statistics as soon as they are available.  Flexible NetFlow is an evolving technology available in Cisco devices to help with visibility into how network assets are being used and the network behavior. 

Please find more information on FNF here.

   ManageEngine constantly studies the market and user demands to support new technologies. In fact ManageEngine NetFlow Analyzer is the first tool to support multiple bandwidth and performance monitoring technologies like NetFlow, NBAR and CBQoS in the market. And currently ManageEngine NetFlow Analyzer supports Flexible NetFlow without any issues. Please write your questions to netflowanalyzer-support@manageengine.com. We are happy to assist you at any moment.

Thanks

Raj 

Download | Interactive Demo | Product overview video | Twitter | Customers

 Flexible NetFlow is the next generation flow export technique promoted by Cisco Systems. As the word depicts it is highly flexible based on user requirements and to monitor specific network behaviour. Traditional NetFlow used a fixed seven tupple of IP information to identify a flow most of the time. Advantages of Flexible NetFlow 

1. Flexibility to choose the desired export fields. 

2. Reduce the number of flows and allows CPU to perform efficient routing and switching

3. Convergence of multiple accounting technologies into one accounting mechanism

Flexible NetFlow and NetFlow V9

  The export protocol of choice for Flexible NetFlow is the NetFlow Version 9 export protocol, but unfortunately and to date, NetFlow Version 5 has been a much more widely used protocol because of the legacy Cisco IOS® Software images that are still around that supported the NetFlow v5 export protocol only and worked very well. However Cisco claims the future is going to be Flexible NetFlow. And believe it this migration is going to very smooth since Flexible NetFlow can also be configured to export some predefined flow records using the NetFlow Version 5 protocol format for backward compatibility. This helps your existing collectors can work with Flexible NetFlow until you find a real requirement to use additional fields offered by Flexible NetFlow.

Flexible NetFlow Configuration

    Traditional NetFlow configuration is pretty much straight forward. Flexible NetFlow consists of components that can be used together in several variations to perform traffic analysis and data export, and the new command-line interface (CLI) configuration follows the same traditional logic.In this user-defined flow records and the component structure of Flexible NetFlow make it easy to create various configurations for traffic analysis and data export on a networking device with a minimum number of configuration commands. 

    Flexible NetFlow consists of components that can be used together in several variations to perform traffic analysis and data export, and the new command-line interface configuration follows the same traditional logic.

 Let's see this components in detail

Flow Monitor:

    A Flexible NetFlow Flow Monitor describes the NetFlow cache or information stored in the cache. The Flow Monitor contains the Flow Records or key and non-key fields within the cache. Also, part of the Flow Monitor is the Flow Exporter which contains information about the export of NetFlow information including the destination address of the NetFlow collector. The Flow Monitor includes various cache characteristics including the timers for exporting, the size of the cache and if required, the packet sampling rate.

Flow Record:

    A Flow Record is a set of key and non-key NetFlow field values used to characterize flows in the NetFlow cache. Flow Records may be pre-defined for ease of use or customized and user defined. A typical pre-defined record will aggregate flow data and allow users to target common applications for NetFlow. User defined records will allow selection of specific key or non-key fields in the Flow Record. The user defined field is the key to Flexible NetFlow allowing a wide range of information to be characterized and exported by NetFlow. It is expected that different network management applications will support specific user defined and pre-defined Flow Records based on what they are monitoring (ie: security detection, traffic analysis, capacity planning).

Flow Exporter:

    The Flexible NetFlow Exporter allows the user to define where the export can be sent, the type of transport for the export and properties for the export. Multiple exporters can be configured per Flow Monitor or the same exporter can be used by multiple monitors.

The following figure shows the flow monitor and it components.

 In our next blog we are going to use a pre-defined (defined in IOS itself) flow record to export netflow records using Flexible Netflow. In the meanwhile if you have any queries. please write to netflowanalyzer-eesupport@manageengine.com

Thanks

Raj

Download | Interactive Demo | Product overview video